Carbon recycling system for blast furnaces could reduce steelmaking emissions by 90%, claims study

Carbon recycling system for blast furnaces could reduce steelmaking emissions by 90%, claims study
Share on linkedin
Share on whatsapp
Share on twitter
Share on xing
Share on email
Share on facebook
Most of the world’s steel is produced via blast furnaces which produce iron from iron ore and basic oxygen furnaces which turn that iron into steel. Researchers from the University of Birmingham have designed a novel adaptation for existing iron and steel furnaces that could reduce carbon dioxide (CO2) emissions from the steelmaking industry by nearly 90%.

Researchers from the University of Birmingham have designed a novel adaptation for existing iron and steel furnaces that could reduce carbon dioxide (CO2) emissions from the steelmaking industry by nearly 90%.

This radical reduction is achieved through a ‘closed loop’ carbon recycling system, which could replace 90% of the coke typically used in current blast furnace-basic oxygen furnace systems and produces oxygen as a byproduct.

Devised by Professor Yulong Ding and Dr Harriet Kildahl from the University of Birmingham’s School of Chemical Engineering, the system is detailed in a paper published in the Journal of Cleaner Production, which shows that if implemented in the UK alone, it could deliver cost savings of £1.28 billion in 5 years while reducing overall UK emissions by 2.9%.

Professor Ding said: “Current proposals for decarbonising the steel sector rely on phasing out existing plants and introducing electric arc furnaces powered by renewable electricity. However, an electric arc furnace plant can cost over £1 billion to build, which makes this switch economically unfeasible in the time remaining to meet the Paris Climate Agreement. The system we are proposing can be retrofitted to existing plants, which reduces the risk of stranded assets, and both the reduction in CO2, and the cost savings, are seen immediately.”

Most of the world’s steel is produced via blast furnaces which produce iron from iron ore and basic oxygen furnaces which turn that iron into steel.

The process is inherently carbon intensive, using metallurgical coke produced by destructive distillation of coal in a coke oven, which reacts with the oxygen in the hot air blast to produce carbon monoxide. This reacts with the iron ore in the furnace to produce CO2. The top gas from the furnace contains mainly nitrogen, CO and CO2, which is burned to raise the air blast temperature up to 1200 to 1350oC in a hot stove before blown to the furnace, with the CO2 and N2 (also containing NOx) emitted to the environment.

The novel recycling system captures the CO2 from the top gas and reduces it to CO using a crystalline mineral lattice known as a ‘perovskite’ material. The material was chosen as the reactions take place within a range of temperatures (700-800oC) that can be powered by renewable energy sources and/or generated using heat exchangers connected to the blast furnaces.

Current proposals for decarbonising the steel sector rely on phasing out existing plants and introducing electric arc furnaces powered by renewable electricity. However, an electric arc furnace plant can cost over £1 billion to build, which makes this switch economically unfeasible in the time remaining to meet the Paris Climate Agreement. The system we are proposing can be retrofitted to existing plants, which reduces the risk of stranded assets, and both the reduction in CO2, and the cost savings, are seen immediately. Professor Yulong Ding, School of Chemical Engineering

Under a high concentration of CO2, the perovskite splits CO2 into oxygen, which is absorbed into the lattice, and CO, which is fed back into the blast furnace. The perovskite can be regenerated to its original form in a chemical reaction that takes place in a low oxygen environment. The oxygen produced can be used in the basic oxygen furnace to produce steel. Iron and steelmaking is the biggest emitter of CO2 of all foundation industrial sectors, accounting for 9% of global emissions. 

According to the International Renewable Energy Agency (IRENA), it must achieve a 90% reduction in emissions by 2050 to limit global warming to 1.5°C. 

The University of Birmingham Enterprise has filed a patent application covering the system and its use in metal production and is looking for long-term partners to participate in pilot studies, deliver this technology to existing infrastructure, or collaborate on further research to develop the system.

Share this story

Share on linkedin
Share on whatsapp
Share on twitter
Share on xing
Share on email
Share on facebook
Green Steel World Editorial Team
Green Steel World Editorial Team
News brought to you by our editorial team. We are a knowledge platform – driving technology to the global green steel community. If you wish to contribute your press, please contact us.

About this Featured Story

Every week we share a new Featured Story with our Green Steel community. Join us and let’s share your Featured Story on GreenSteelWorld.com.
Want to contribute as author? Please contact us.

Share this post with your friends and colleagues

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on telegram
Telegram
Share on xing
XING
Share on whatsapp
WhatsApp

All images were taken before the COVID-19 pandemic, or in compliance with social distancing.